Tyre Service Tools

Description:

• Sarv’s tire serial number dot remover tool is a specialised , robust and sturdy tool to effectively remove the serial number on tires.
• Extremely easy operation because of the high quality blades that safely peel the intact piece of rubber containing the DOT number from the tire surface.
• This is a specialised and strong tool for defacing and removing the serial number and hence saves the tire wall from damage by using other knives.
• The blades are replaceable with part number 550005BL.

Description:

• Sarv’s vast range of wheel service accessories include Double ended Wheel Spanners and Lug Wrench to easily remove and install lug nuts on Truck/Bus/farm and off-road vehicles.
• These are manufactured with heavy duty high quality heat treated chrome vanadium steel with and comes with a rust resistant chrome plated finish.
• Manufactured to remove/install 24mm lug nut on from one side and 27mm lug nuts.
• Used with tightening and loosening with Tommy Bar

Description:

• Sarv’s vast range of wheel service accessories include High Quality Four way Wheel Nut Wrench to easily remove and install lug nuts on Passenger Car Vehicles and LCVs.
• Includes – 24mm, 27mm and 32mm flange drive hexagons, and 3/4″ square drive.
• Made from heat treated chrome vanadium alloy steel with durable welded centre for providing strength and leverage while tightening and loosening Wheel nuts.

Description:

• Wheel Protect Loose wheel nut indicators are extensively used by the transport industry for accurate Manual and Visual monitoring for loosened wheel nuts on the wheels and helps prevent wheel hub damage or the loss of a road wheel should a wheel nut get loosed. Must for Road Safety.
• Extremely easy to install and de-install. Easy reading by vidual inspection. Size of this indicator – 30mm.
• Available in sizes: 17mm,19mm,21mm,24mm,26mm,27mm,30mm,32mm,33mm,36mm,38mm,40mm,41mm.
• Available colors: Fluorescent green, Red, Pink, Yellow.

Description:

• Sarv’s Pump rings or tyre bead seaters are a perfect solution to inflate the tyres without worrying about Air leakages!!
• This particular Rigid pump ring is designed for 22.5″ rim dia truck tyres .
• The pump ring is seated over the rim such that it forms a wall around the rim.
• It is used for deformed rims, hard-to-seat radial or bias-belted tires.
• As tire is inflated, Sarv Pump ring forms a seal between the rim and tire( cancelling air leakage), allowing the air pressure to force the tyre bead into the rim flange.
• As the tire is fully inflated, the pump ring slides out over the rim.
• Made from high quality metal.
• Comes with a rubber ring inside to give friction while the pump ring comes out and also saves the rims from damage.
• The inside rubber ring can be replaced with part number 224222R.

Description:

• Sarv’s rubber mallet is used general tyre use such as inserting the hub cover or wheel cover and workshop use by using with tyre levers etc .
• The mallet top is made of high grade rubber which provides enough strength but prevents damage or scratching to the surface.
• The handle is made of wood

Description:

• Sarv’s Tommy Bar manufactured to fit all Sarv double ended wheel nut wrenches for trucks , buses , farm and Off-road vehicles.
• Made from high quality Heat-treated steel for strength and durability to provide leverage while tightening and loosening wheel nuts.

Description:

• Most Famous Sarv Manual Tyre changing Kit for Multipiece 20″ Truck Tubetype Tires , simplifies the traditional way of openining and locking the rings.
• The Kit is specialised to Remove and replace 2 Piece and 3 peice rims on Truck 20″ Tubetype Tyres.
• 220914 is a specialised tyre lever tool to remove Single Lock Ring on 2 peice Rims. It is very sturdy and made from forged high-grade carbon steel and heat-treated for long-lasting strength and durability.
• The Jaws of the tool are designed to securely fit on the lug nut hole and flange.
• The Lever takes the leverage against the lug nut to remove the flange/locking ring from the rim on 2 peice rims.
• Tyre levers 220008 and 220003 are ursed in removing the 3 peice rims. 220003 is inserted between the space between top most lock ring and 220008 is inserted between the two lock rings. applying enough pressure with both the levers, the lock rings starts to come out.
• Once the top lock rings comes out, it is easy to remove the second ring.
• Screw Driver is used for removing and installing the tyre valve core.
• Tyre Mounting levers or Ring Fitting Tools are made from high quality steel and heat treated for even greater strength.
• These are used in pairs and are designed to fit both 2 peice and 3 peice rims, keeping the concept same.
• One side of the lever has the leverage bar to take the leverage against the rim, for fitting the lock ring back.
• One Leverage bar side in inserted in the lug nut hole to press the lock ring back from one end.
• To avoid slippage, it is then kept in the same position, and other lever is positioned from other end to start pressing the lock ring. the same process is repeated for 2 or 3 peice rims.
• The kit contents have code numbers infront of them, which can be ordered again .

Kit contains following items :

• Valve Core Screw Driver 330002 – 1 No.
• Ring Removal Tool 220914 – 1 No.
• Ring Fitting Tool 221014 – 2 Nos.
• Tyre Lever 220008 1 No.
• Tyre Lever Crank End 220003 – 1 No.

Description:

• Sarv Specialises in manufacturing a wide range of Tyre tread Depth gauges used for all vehicles from two wheelers, Passenger Cars, Trucks to OTRs.
• These depth gauges are effective and give accurate readings of tread depth meaurements.
• The scales are accurate and easily readable.
• This particular tread depth gauge is made of plastic and gives a reading between 0-30mm.
• Can be used for two wheelers and small passenger car tyres.
• Made from light weight plastic.

Description:

• Sarv India’s Wheel lug nut cover puller pulls/removes gently stainless, painted, chrome or coated lug nut covers with ease.
• Can be used with all lug nut covers due to its universal shape.
• The top jaws are PVC coated to protect the lug nut covers from scratch while pulling, and also provide firmer grip.
• Made from special Steel & electroplated these are stronger and firmer in application.
• The lug nut covers can be damaged if used with ordinary nut cap pullers.

Description:

• Sarv’s Wheel cover / Hub Cap remover -removes wheel covers quickly and easily without damaging or scratching the rims and covers.
• The special rubber head prevents damage to the hub cap and as replaceable.

Description:

• Sarv’s specialises in manufacturing Wheel Flange looseners .
• Sarv’s Wheel Flanger/ Looseners or Tyre Bead Breaker are chisel type and are used to manually break tyre beads with use of a hammer .
• Easily and quickly loosens rusted truck and bus beads for tyre changing processes.

Description:

• Sarv’s vast range of wheel service accessories include high quality wheel stud cap removal tool with jaws.
• Made from high quality plastic , the jaws easily and securely hold the wheel nut cap and comes out with easy pull.
• It slides over the cap, snaps into position and when pulled, extracts and retains the plastic cap in the tool.

Description:

• Sarv  specialises in manufacturing a range of over 30 professional Tyre Levers for commerical use.
• Sarv Tyre Levers are sturdy , functional and can mount demount a wide of tyres ranging from Bicycles , Passenger Car tyres, LCVs, Commercial Vehicles, OTRs and Agri Tyres without damaging the bead and rims.
• This sarv 600 mm tyre lever in suitable for LCV, truck and large wheels.
• It is extra heavy duty with crank end.
• Suitable for use in changing pneumatic tyres.